Holders

ClicOn offers a comprehensive range of holders which are high on quality and low in profile. All of the holders come with a built-in tilt swivel that can rotate 360 degrees and adjust the holder 15 degrees in any direction for optimal viewing. The range includes holders from non-powered, to units with integrated power solutions.

All ClicOn holders fit perfectly with the vast choice of ClicOn mounts available.

No drilling, no vibration, no popping off!

 

Types of ClicOn Holders

While there are variants of the holder, depending on the device specifications, there are generally three basic types that are available across the range:

  1. Passive Holder
    • A non-powered holder designed to hold your device securely in a horizontal and landscape position.
    • Plug-in chargers and portable hands-free can still be used when your device is placed in the holder.
  2. Active Holder with Cig-Plug
    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • Built with a 12/24 volts plug-in charger, the holder connects power to your device using the vehicle's cigarette lighter socket, or in some cases, USB outlet.
    • Simply place your device into the holder and connect to power: your device will keep fully charged.
  3. Fixed Install Holder, Molex System (to be hard-wired)

     

    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • The integrated power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system. Output 5 Volts 2 amps.
    • The assembly can also provide power & charge to a second mobile device using  Molex Adapter Cables.
    • Simply place your device into the holder and  your device will keep fully charged.

 

You will find a full list of holder types available for your particular device when you follow the drop-down menu.

 

How do I fit a ClicOn holder into my car?

Select a ClicOn mount that is available for your particular vehicle. You will find these under the Mounts section.

All ClicOn holders attach to all ClicOn dashmounts and headrest mounts by following these instructions (which come with the holder):

  1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder;
  2. Place the attaching plate in the desired position on the dashmount or headrest mount. Screw the attaching plate into place with the enclosed screws;
  3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate, taking care to not over-tighten the attachment screw;
  4. Done!

 

Please note that tablets are generally larger and heavier than other mobile devices, so care and thought should be taken when deciding whether to mount a tablet on a dashmount on the dashboard.  For this reason, the manufacturer does not extend the warranty to include tablets mounted on the dashboard.


Is this ClicOn mounting system legal?

Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.

 

What is the product warranty?

12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace or exchange it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



ClicOn Mount Plate

SKU: 215921

Fits: Zebra ZQ520

Custom made Mount Plate with MultiMoveClip. The Mount Plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the holder to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Mount Plate with MultiMoveClip

SKU: 215947

Fits: Zebra ZD420

Custom made Mount Plate with MultiMoveClip. The Mount Plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the holder to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Key Lock Garmin Holder

SKU: 215999

Fits: Garmin dezi and Fleet series

The AMPS mounting profile equips the holder to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$189.90

ClicOn Passive Holder with Tilt Swivel

SKU: 216000

Fits: Garmin dezi and Fleet series

The AMPS mounting profile equips the holder to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$139.90

ClicOn Key Lock for Garmin Holder

SKU: 216001

Fits: Garmin dezi and Fleet series

Locking block with 2 keys. To be used with Item no: 216000. Transforms a passive holder into a holder with a locking feature, enables you to lock your Garmin device in the holder.

$59.90

ClicOn Mount Plate with MultiMoveClip

SKU: 216002

Fits: Informs LK-P12

Custom made Printer Plate with MultiMoveClip. This mounting plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the mount plate to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Mount with MultiMoveClip & Power Block

SKU: 216003

Fits: Informs LK-P12

Custom made Mobile Printer Mount Plate with MultiMoveClip and Sliding Power Block. The power block integrates with the charge terminals of the printer keeping the device fully charged at all times.

$69.00

ClicOn Mount Plate with MultiMoveClip

SKU: 216004

Fits: Zebra QLN 420

Custom made Printer Plate with MultiMoveClip. This mounting plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the mount plate to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Mount Plate

SKU: 216005

Fits: Zebra QLN 420

Custom made Mount Plate with MultiMoveClip. The Mount Plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the holder to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Passive Holder with MultiMoveClip

SKU: 216006

Fits: Zebra ZD410

Custom made Printer Holder with MultiMoveClip. The Holder offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the holder to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Mount Plate with MultiMoveClip

SKU: 216008

Fits: Zebra ZQ520

Custom made Printer Plate with MultiMoveClip. This mounting plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the mount plate to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Active Holder with Cig-Plug Charger

SKU: 249001

Fits: Motorola IHV MC9500

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$242.00

ClicOn Fixed Install Holder- Hard Wired

SKU: 249002

Fits: Motorola IHV MC9500

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$242.00

ClicOn Active Holder with Cig-Plug Charger

SKU: 249003

Fits: Motorola IHV MC55/MC65

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$242.00

ClicOn Fixed Install Holder- Hard Wired

SKU: 249004

Fits: Motorola IHV MC55/MC65

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$242.00

ClicOn Active Holder with Cig-Plug Charger

SKU: 249007

Fits: Motorola IHV ET1

This Motorola Compatible charging holder is a cradle style mount custom made for a perfect fit with the Motorola ET1 tablet.

$242.00

ClicOn Fixed Install Holder- Hard Wired

SKU: 249008

Fits: Motorola IHV ET1

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$242.00

ClicOn Ball Mount

SKU: 272005

Fits: Navman S Series
Mio Moov
Navman MY Series

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$29.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272011

Fits: Navigon 2100
Navigon 2110

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272014

Fits: Mio C230

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272018

Fits: TomTom XL 30 Series
TomTom ONE Australia
TomTom XL IQ Routes
TomTom XL 340
TomTom XL 250 / XL 350

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272019

Fits: TomTom White Pearl
TomTom One 140

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272020

Fits: Navigon 2100 Max
Navigon 2110 Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Tilt Swivel

SKU: 272021

Fits: Navigon 8110

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00