Holders

HMP offers a comprehensive range of ClicOn holders which are high on quality and low in profile. All of the holders come with a built-in tilt swivel that can rotate 360 degrees and adjust the holder 15 degrees in any direction for optimal viewing. The range includes holders from non-powered, to powered solutions with a Cig-Plug Charger or Hardwired Installation.

The AMPS mounting profile equits the holders to easily attach to a variety of our mounting solutions that include our Dash Mounts, Pedestal Mounts, Suction Mounts, Bar Mounts, Forklift Mounts or form part of your own solution.

Our Padded Holders our designed for users that dont have a cover on their device. The holder has a flock finish to help protect your device against scratching. The Adjustable Holders are made for devices in a skin or cover.These holders are designed to adjust to the footprint of the cover.

No drilling, no vibration, no popping off!

SmartPhone Holders

Non Powered Holders

A Non-Charging Holder designed to hold your device securely in a horizontal and landscape position.

Plug-in chargers and USB Charge/Sync Cables  can still be used when your device is placed in the holder.

Powered Holder with Cig-Plug Charger

A Charging Holder designed to hold your device securely in a horizontal and landscape position.

Built with a 12/24 volts plug-in charger, the holder connects power to your device using the vehicle's cigarette lighter socket, or in some cases, USB outlet.

Once installed simply dock your device into the holder and  connect to power keeping your device  fully charged.

Powered Holder with Cig-Plug Charger USB Charger

A Charging Holder designed to hold your device securely in a horizontal and landscape position.

If your car has USB interface, you can disconnect the cig-plug from the holder's cable to connect directly to the USB connector in your vehicle.

In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your deice to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

Powered Holder Hardwired Instalation

A Charging holder designed to hold your device securely in a horizontal and landscape position.

The  power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system. Output 5 Volts 2 amps.

Once installed simply dock your device into the holder and  connect to power keeping your device keep fully charged.

How do I fit a ClicOn holder into my car?

Select a ClicOn mount that is available for your particular vehicle. You will find these under the Mounts section.

All ClicOn holders attach to all ClicOn dashmounts and headrest mounts by following these instructions (which come with the holder):

Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder;

Place the attaching plate in the desired position on the dashmount or headrest mount. Screw the attaching plate into place with the enclosed screws;

Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate, taking care to not over-tighten the attachment screw;

Done!

Please note that tablets are generally larger and heavier than other mobile devices, so care and thought should be taken when deciding whether to mount a tablet on a dashmount on the dashboard.  For this reason, the manufacturer does not extend the warranty to include tablets mounted on the dashboard.

 

Is the ClicOn mounting system legal?

Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.

 

What is the product warranty?

12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace or exchange it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



SKU: 521621

ClicOn Charging Adjustable Holder
With Micro USB Connector

Fits: To fitWidth 62-77 mm, Slot 9 -13 mm

$119.00

Not yet rated
SKU: 521628

ClicOn Charging Adjustable Holder
With Micro USB Connector

Fits: Width 75-89 mm, Slot 6 -10 mm

$119.00

Not yet rated
SKU: 521629

ClicOn Charging Adjustable Holder
With Micro USB Connector

Fits: Width 75-89 mm, Slot 9 -13 mm

$119.00

Not yet rated
SKU: 521630

ClicOn Charging Adjustable Holder
With Micro USB Connector

Fits:Width 75-89 mm, Slot 12 -16 mm

$119.00

Not yet rated
SKU: 521622

ClicOn Charging Adjustable Holder
With Micro USB Connector

Fits: Width 62-77 mm, Slot 12 -16 mm

$119.00

Not yet rated
SKU: 527620

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 62-77 mm, Slot6 -10mm

$119.00

Not yet rated
SKU: 527621

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 62-77 mm, Slot 9 -13 mm

$119.00

Not yet rated
SKU: 527628

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 75-89 mm, Slot 6 -10 mm

$119.00

Not yet rated
SKU: 527629

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 75-89 mm, Slot 9 -13 mm

$119.00

Not yet rated
SKU: 527630

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 75-89 mm, Slot 12 -16 mm

$119.00

Not yet rated
SKU: 527622

ClicOn Charging Adjustable Holder
Micro USB Connector

Fits: Width 62-77 mm, Slot 12 -16 mm

$119.00

Not yet rated
SKU: 512964

ClicOn Charging Adjustable Holder
Fits Device in Multiple Skins

Fits: Samsung Galaxy S8

$119.00

Not yet rated
SKU: 513409

ClicOn Charging Adjustable Holder - Hard Wire Inst

Fits: Samsung Galaxy S3 i9300 with Skins

$139.00

Not yet rated
SKU: 527165

ClicOn Charging Adjustable Holder - Hard Wire Inst

Fits: Apple iPhone 4/4S with skins

$129.00

Not yet rated
SKU: 527512

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device with Griffin Survivor All Terrain Case

Fits: Apple iPhone 5/5S with Griffin Survivor Case

$129.00

Not yet rated
SKU: 527502

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device with Standard Skin/Cover

Fits: Apple iPhone 5/5C/5S with skins

$129.00

Not yet rated
SKU: 527503

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device with Slim Skin/Cover

Fits: Apple iPhone 5/5C/5S with skins

$129.00

Not yet rated
SKU: 527504

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device with Rugged Skin/Cover

Fits: Apple iPhone 5/5C/5S with skins

$129.00

Not yet rated
SKU: 527500

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device in Multiple Skins

Fits: Apple iPhone 5/5C/5S with skins

$129.00

Not yet rated
SKU: 527666

ClicOn Charging Adjustable Holder - Hard Wire Inst

Fits: iPhone 6/6s/7/8/X/Xs

$129.90

Not yet rated
SKU: 527662

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device in Multiple Skins

Fits: iPhone 6/6s/7/8/X/Xs

$129.90

Not yet rated
SKU: 527667

ClicOn Charging Adjustable Holder - Hard Wire Inst
Complete with Tilt Swivel

Fits: iPhone 6Plus / 6sPlus / 7Plus / 8Plus / X  /Xs/  Xs Max / 11

$129.90

Not yet rated
SKU: 527663

ClicOn Charging Adjustable Holder - Hard Wire Inst
Fits Device in Multiple Skins

Fits: iPhone 6sPlus/ 7Plus/ 8Plus /Xs Max

$129.90

Not yet rated
SKU: 527843

ClicOn Charging Adjustable Holder - Hard Wire Inst
USB Type C Connector

Fits: Width 75-89 mm, Slot6 -10mm

$119.00

Not yet rated