Holders

ClicOn offers a comprehensive range of holders which are high on quality and low in profile. All of the holders come with a built-in tilt swivel that can rotate 360 degrees and adjust the holder 15 degrees in any direction for optimal viewing. The range includes holders from non-powered, to units with integrated power solutions.

All ClicOn holders fit perfectly with the vast choice of ClicOn mounts available.

No drilling, no vibration, no popping off!

 

Types of ClicOn Holders

While there are variants of the holder, depending on the device specifications, there are generally three basic types that are available across the range:

  1. Passive Holder
    • A non-powered holder designed to hold your device securely in a horizontal and landscape position.
    • Plug-in chargers and portable hands-free can still be used when your device is placed in the holder.
  2. Active Holder with Cig-Plug
    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • Built with a 12/24 volts plug-in charger, the holder connects power to your device using the vehicle's cigarette lighter socket, or in some cases, USB outlet.
    • Simply place your device into the holder and connect to power: your device will keep fully charged.
  3. Fixed Install Holder, Molex System (to be hard-wired)

     

    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • The integrated power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system. Output 5 Volts 2 amps.
    • The assembly can also provide power & charge to a second mobile device using  Molex Adapter Cables.
    • Simply place your device into the holder and  your device will keep fully charged.

 

You will find a full list of holder types available for your particular device when you follow the drop-down menu.

 

How do I fit a ClicOn holder into my car?

Select a ClicOn mount that is available for your particular vehicle. You will find these under the Mounts section.

All ClicOn holders attach to all ClicOn dashmounts and headrest mounts by following these instructions (which come with the holder):

  1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder;
  2. Place the attaching plate in the desired position on the dashmount or headrest mount. Screw the attaching plate into place with the enclosed screws;
  3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate, taking care to not over-tighten the attachment screw;
  4. Done!

 

Please note that tablets are generally larger and heavier than other mobile devices, so care and thought should be taken when deciding whether to mount a tablet on a dashmount on the dashboard.  For this reason, the manufacturer does not extend the warranty to include tablets mounted on the dashboard.


Is this ClicOn mounting system legal?

Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.

 

What is the product warranty?

12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace or exchange it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



ClicOn Active Holder with Cig-Plug Charger

SKU: 215251

Fits: TomTom One XL
TomTom One XL-S

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$99.00

ClicOn Fixed Install Holder - Hard Wired

SKU: 215252

Fits: TomTom One XL
TomTom One XL-S

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Ball Mount for Devices with TMC Module

SKU: 215258

Fits: Navman GPS  Device Series
 

This ball mount replaces the original suction cup mounts of many different GPS models.

$29.00

ClicOn Mount with Tilt Swivel

SKU: 215267

Fits: TomTom GPS Device Series

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Active Mount with Cig-Plug Charger

SKU: 215268

Fits: TomTom GO Series

A Moiunt designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$99.00

ClicOn Fixed Install Mount - Hard Wired

SKU: 215269

Fits: TomTom GO520 720 920
TomTom GO730/930

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Ball Mount with Cig-Plug Charger

SKU: 215270

Fits: Navman GPS Series

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$99.00

ClicOn Ball Mount - Hard Wire

SKU: 215271

Fits: Navman ICN 530
Navman iCN 720 750
Navman N40i
Navman F20
Navman N20
Navman N60i

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Wall Mount - White

SKU: 215444

Fits: Apple iPad 1

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a wall.

$69.00

ClicOn Wall Mount - Black

SKU: 215445

Fits: Apple iPad 1

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a wall.

$69.00

ClicOn Active Holder with Cig-Plug Charger

SKU: 215470

Fits: TomTom GO1000 /1005

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$99.00

ClicOn Wall Mount - Black

SKU: 215485

Fits: Apple iPad 2
Apple iPad 3

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a wall.

$69.00

ClicOn Wall Mount - White

SKU: 215487

Fits: Apple iPad 2
Apple iPad 3

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a wall.

$69.00

ClicOn Ball Mount

SKU: 215547

Fits: Garmin Nuvi All
 

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$29.00

ClicOn Ball Mount

SKU: 215567

Fits: TomTom Start
TomTom Via 125
TomTom Via 110
TomTom 825 LIVE
TomTom GO LIVE 820
TomTom Via 100
TomTom Via 280

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Ball Mount

SKU: 215588

Fits: TomTom GO 500/600 New Version
TomTom GO510
TomTom GO5000
TomTom GO6000/6100

A Mount designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$29.00

ClicOn Passive Holder with Tilt Swivel

SKU: 215682

Fits: TomTom GO520 720 920
TomTom GO520T 720T 920T
TomTom GO730/930
TomTom GO730T/930T

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$0.00

ClicOn Active Holder with Cig-Plug Charger

SKU: 215683

Fits: TomTom GO 500/600 New Version
TomTom GO510
TomTom GO5000
TomTom GO6000/6100

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$99.00

ClicOn Fixed Install Holder - Hard Wired

SKU: 215684

Fits: TomTom GO 500/600 New Version
TomTom GO510
TomTom GO5000
TomTom GO6000/6100

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Passive Holder with Key Lock

SKU: 215778

Fits: Tom Tom Bridge

The holders comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts, or form part of your own solution.

$129.90

ClicOn Mount with MultiMove Clip & Power Block

SKU: 215803

Fits: Zebra QLN 220/320

Custom made Mobile Printer Mount Plate with MultiMoveClip and Sliding Power Block. The power block integrates with the charge terminals of the printer keeping the device fully charged at all times.

$69.00

ClicOn Mount Plate with MultiMoveClip

SKU: 215806

Fits: Zebra QLN 220/320

Custom made Printer Plate with MultiMoveClip. This mounting plate offers a convenient and secure way to mount your printer. The AMPS hole mounting pattern equips the mount plate to easily attach to a wide variety of mounting solutions.

$69.00

ClicOn Mount Plate with MultiMoveClip & 2"

SKU: 215842

Fits: Zebra QLN 220/320

Custom made Mobile Printer Mount Plate with MultiMoveClip and a 2" Pedestal Mount. This mount offers a convenient and secure way to mount your printer.

$69.00

ClicOn Mount Plate-MultiMoveClip,Power Block &

SKU: 215843

Fits: Zebra QLN 220/320

Custom made Mobile Printer Mount Plate with MultiMoveClip and Sliding Power Block. The power block integrates with the charge terminals of the printer keeping the device fully charged at all times.

$69.00