Holders
HMP offers a comprehensive range of ClicOn holders which are high on quality and low in profile. All of the holders come with a built-in tilt swivel that can rotate 360 degrees and adjust the holder 15 degrees in any direction for optimal viewing. The range includes holders from non-powered, to powered solutions with a Cig-Plug Charger or Hardwired Installation.
The AMPS mounting profile equits the holders to easily attach to a variety of our mounting solutions that include our Dash Mounts, Pedestal Mounts, Suction Mounts, Bar Mounts, Forklift Mounts or form part of your own solution.
Our Padded Holders our designed for users that dont have a cover on their device. The holder has a flock finish to help protect your device against scratching. The Adjustable Holders are made for devices in a skin or cover.These holders are designed to adjust to the footprint of the cover.
No drilling, no vibration, no popping off!
SmartPhone Holders
Non Powered Holders
A Non-Charging Holder designed to hold your device securely in a horizontal and landscape position.
Plug-in chargers and USB Charge/Sync Cables can still be used when your device is placed in the holder.
Powered Holder with Cig-Plug Charger
A Charging Holder designed to hold your device securely in a horizontal and landscape position.
Built with a 12/24 volts plug-in charger, the holder connects power to your device using the vehicle's cigarette lighter socket, or in some cases, USB outlet.
Once installed simply dock your device into the holder and connect to power keeping your device fully charged.
Powered Holder with Cig-Plug Charger USB Charger
A Charging Holder designed to hold your device securely in a horizontal and landscape position.
If your car has USB interface, you can disconnect the cig-plug from the holder's cable to connect directly to the USB connector in your vehicle.
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your deice to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
Powered Holder Hardwired Instalation
A Charging holder designed to hold your device securely in a horizontal and landscape position.
The power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system. Output 5 Volts 2 amps.
Once installed simply dock your device into the holder and connect to power keeping your device keep fully charged.
How do I fit a ClicOn holder into my car?
Select a ClicOn mount that is available for your particular vehicle. You will find these under the Mounts section.
All ClicOn holders attach to all ClicOn dashmounts and headrest mounts by following these instructions (which come with the holder):
Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder;
Place the attaching plate in the desired position on the dashmount or headrest mount. Screw the attaching plate into place with the enclosed screws;
Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate, taking care to not over-tighten the attachment screw;
Done!
Please note that tablets are generally larger and heavier than other mobile devices, so care and thought should be taken when deciding whether to mount a tablet on a dashmount on the dashboard. For this reason, the manufacturer does not extend the warranty to include tablets mounted on the dashboard.
Is the ClicOn mounting system legal?
Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.
What is the product warranty?
12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace or exchange it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.
Fixed Install Holder- Hard Wired
Key Features
- Two-Part Solution
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
Holder Fit Details
Motorola IHV ET1
$242.00
Fixed Install Holder- Hard Wired
Key Features
- Two-Part Solution
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
Holder Fit Details
Motorola IHV MC9500
$242.00
Fixed Install Holder- Hard Wired
Key Features
- Two-Part Solution
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
Holder Fit Details
Motorola IHV MC55/MC65
$242.00
Heavy Duty Key Lock Holder
Designed to be used with the Zebra XDIM module
Key Features
- Two-Part Solution
- Built-in Key Lock
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Zebra/Xplore L10 XPAD
$269.90
Heavy Duty Key Lock Non Charging Holder
Device with Original Rugged Frame
Key Features
- Two-Part Solution
- With Original Rugged Frame
- Built In Key Lock
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Getac F110
$169.90
Heavy Duty Key Lock Non Charging Holder
Fits Device with and without Kick-Stand and Hand Strap
Key Features
- Two-Part Solution
- Built-in Key Lock
- Firm & Secure Fit
- AMPS Pattern Mount Holes
Holder Fit Details
Getac RX10
$249.90
Heavy Duty Non Charging Holder
Fits Device without Rugged Frame
Key Features
- Two-Part Solution
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Zabra ET 50/55 8.3
$179.90
Heavy Duty Non Charging Holder
Device with Original Rugged Frame
Key Features
- Two-Part Solution
- Device with Original Rugged Frame
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Getac F110
$129.90
Heavy Duty Non Charging Holder
Fits your device with or without a Hand Strap
Key Features
- Two-Part Solution
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Honeywell RT10
$139.90
Holder for Cable Connection
Holder Fit Details
TomTom ONE Australia
TomTom XL IQ Routes
TomTom XL 340
$125.00
$125.00
$189.90
Key Lock Heavy Duty Non Charging Holder
Extra Strength Holder For Device without Rugged Frame
Key Features
- Two-Part Solution
- Built in Key Lock
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Zabra ET 5x 8.3 Series without a Rugged Frame
$219.90
Key Lock Heavy Duty Non Charging Holder
Fits your device with or without a Hand Strap
Key Features
- Two-Part Solution
- Built in Key Lock
- Firm & Secure Fit
- AMPS and Vesa 75/100 Profile Mounting Holes
Holder Fit Details
Honeywell RT10
$169.90
Key Lock Non Charging Modular Cradle
Fits Device + SnapBack Frame
Key Features
- Upgradeable
- Modular Parts
- Firm & Secure Fit
- AMPS and Vesa 75mm Profile Mounting Holes
Holder Fit Details
Zebra ET 80/85 Series
$219.90
Mount with Tilt Swivel
Holder Fit Details
Navman iCN 720 750
Navman N40i
Navman F20
Navman N20
Navman N60i
$29.00
Non Charging Holder
Fits Device without Bumper
Key Features
- Two-Part Solution
- Firm & Secure Fit
- AMPS mounting profile
- Fits device without bumper
Holder Fit Details
CipherLab RS30/RS31 Series
$69.00