Holders

ClicOn offers a comprehensive range of holders which are high on quality and low in profile. All of the holders come with a built-in tilt swivel that can rotate 360 degrees and adjust the holder 15 degrees in any direction for optimal viewing. The range includes holders from non-powered, to units with integrated power solutions.

All ClicOn holders fit perfectly with the vast choice of ClicOn mounts available.

No drilling, no vibration, no popping off!

 

Types of ClicOn Holders

While there are variants of the holder, depending on the device specifications, there are generally three basic types that are available across the range:

  1. Passive Holder
    • A non-powered holder designed to hold your device securely in a horizontal and landscape position.
    • Plug-in chargers and portable hands-free can still be used when your device is placed in the holder.
  2. Active Holder with Cig-Plug
    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • Built with a 12/24 volts plug-in charger, the holder connects power to your device using the vehicle's cigarette lighter socket, or in some cases, USB outlet.
    • Simply place your device into the holder and connect to power: your device will keep fully charged.
  3. Fixed Install Holder, Molex System (to be hard-wired)

     

    • A powered holder designed to hold your device securely in a horizontal and landscape position.
    • The integrated power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system. Output 5 Volts 2 amps.
    • The assembly can also provide power & charge to a second mobile device using  Molex Adapter Cables.
    • Simply place your device into the holder and  your device will keep fully charged.

 

You will find a full list of holder types available for your particular device when you follow the drop-down menu.

 

How do I fit a ClicOn holder into my car?

Select a ClicOn mount that is available for your particular vehicle. You will find these under the Mounts section.

All ClicOn holders attach to all ClicOn dashmounts and headrest mounts by following these instructions (which come with the holder):

  1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder;
  2. Place the attaching plate in the desired position on the dashmount or headrest mount. Screw the attaching plate into place with the enclosed screws;
  3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate, taking care to not over-tighten the attachment screw;
  4. Done!

 

Please note that tablets are generally larger and heavier than other mobile devices, so care and thought should be taken when deciding whether to mount a tablet on a dashmount on the dashboard.  For this reason, the manufacturer does not extend the warranty to include tablets mounted on the dashboard.


Is this ClicOn mounting system legal?

Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.

 

What is the product warranty?

12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace or exchange it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



ClicOn Active Holders with Tilt Swivel

SKU: 512926

Fits: Zebra TC56Zebra TC51

Fits device with Zebra Original Rugged Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$159.90

ClicOn Adjustable Passive Holder

SKU: 511667

Fits: iPhone 6 Plus / 6S Plus / 7 Plus / 8 Plus/ X / XR / Xs / Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn Dashmount. ONE part of a TWO part solution. Dimension: To fit Width 75-89 mm Slot 2-10 mm.

$69.90

ClicOn Adjustable Holder with Cable Connect - USB

SKU: 514667

Fits: iPhone 6Plus/6sPlus/7Plus/8Plus/X/XR/Xs/Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. One part of a two part solutuon. To be used with a Standard size Skin. Lightning to USB Cable NOT INCLUDED.

$89.90

Brodit Adjustable Non Powered Holder

Charging Cable Can Be Used When the Device in the Holder

SKU: 511688

Fits: iPhone 6 /6s / 6Plus / 6sPlus / 7 / 7Plus / 8 / 8Plus / X / Xs / Xs Max / XR

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn Dashmount. ONE part of a TWO part solution. Dimension: To fit Width 75-89 mm Slot 9-13 mm.

$69.90

ClicOn Adjustable Passive Holder

SKU: 511666

Fits: iPhone 6/6s/7/8/X/Xs

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.90

ClicOn Active Holder USB for Audio

SKU: 521945

Fits: Samsung Galaxy A5 (2017)

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution. Works with multiple skins and covers. NOT compatible with Otterbox Defender and large profile rugged

$119.00

ClicOn Adjustable Active Holder

SKU: 521666

Fits: iPhone 6/6s/7/8/X/Xs

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.90

ClicOn Adjustable Active Holder- Multiple Skins

SKU: 521662

Fits: iPhone 6/6s/7/8/X/Xs

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution. Works with multiple skins and covers. NOT compatible with Otterbox Defender and large profile rugged

$129.90

ClicOn Mounting Plate with Richter Adaptor

SKU: 215114

Fits: Mio Series/HEMA Navigator

with predrilled AMPS-standard holes.

$29.00

ClicOn Passive Adjustable Holder

SKU: 511484

Fits: Width75-89 mm, Slot12-16mm

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$69.00

ClicOn Passive Holder with Key Lock

SKU: 539644

Fits: Microsoft Surface Pro 3

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$118.80

ClicOn Active Holder, Std & Ext Batteries

SKU: 968788

Fits: Symbol MC70
Motorola MC 70/75
Symbol MC75

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution. Fits Standard and Extended Batteries.

$139.00

ClicOn Adjustable Active Holder

SKU: 521667

Fits: iPhone 6Plus/6sPlus/7Plus/8Plus/X/XR/Xs/Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.90

ClicOn Adjustable Active Holder- USB Type C

SKU: 521841

Fits: Width 62-77 mm, Slot 9 -13 mm

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Adjustable Active Holder- USB Type C

SKU: 521844

Fits: Width 75-89 mm, Slot 9 -13 mm

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Adjustable Fixed Install Holder

SKU: 527667

Fits: iPhone 6Plus/6sPlus/7Plus/8Plus/X/Xs/Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn Dashmount. ONE part of a TWO part solution. Dimension: To fit Width 75-89 mm Slot 6-10 mm.

$129.90

ClicOn Adjustable Fixed Install Holder for Multipl

SKU: 527965

Fits: Samsung Galaxy S8+/S9+/S10+

 

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution. Works with multiple skins and covers. NOT compatible with Otterbox Defender and large profile rugged

$129.00

ClicOn Adjustable Fixed Install Holder-USB Type C

SKU: 527844

Fits: Width 75-89 mm, Slot 9 -13 mm

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Adjustable Holder with Cable Connect-USB C

SKU: 716013

Fits: iPhone X/XR/Xs/Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. One part of a two part solutuon. To be used with a Slim size Skin. Lightning to 30 Pin Cable NOT INCLUDED.

$89.90

ClicOn Adjustable Passive Holder

SKU: 511698

Fits: iPhone 6Plus / 6sPlus / 7Plus / 8Plus / X / Xs / Xs Max

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn Dashmount. ONE part of a TWO part solution. Dimension: To fit Width 75-89 mm Slot 6-10 mm.

$69.90

ClicOn Fixed Install Holder- Hard Wired

SKU: 513781

Fits: Samsung Galaxy Tab S2 8.0

The holders comes with the AMPS hole pattern for quick attachment to any flat surface or mounting brackets such as vehicle dashboard mounts, floor mounts, pedestal mounts or handlebar mounts, or form part of your own solution. ONE part of a TWO part solut

$129.00

ClicOn Fixed Install Holder- Hard Wired

SKU: 727115

Fits: Samsung Galaxy S10

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Padded Active Holder with USB

SKU: 721088

Fits: Google Pixel 3

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$119.00

ClicOn Padded Holder with Cable Connect-USB

SKU: 714009

Fits: iPhone 8

A Holder designed to hold your device firmly and securely in position. Designed to be mounted onto a ClicOn dashmount. ONE part of a TWO part solution.

$75.90