Cup Holder for Cans and Bottles
With Pre-Drilled Mounting Holes
Fit Details
Fits to Dashmounts or your own solution.
$24.90
THE MOUNT
NO HOLES, NO DRILLING
EASY INSTALL
CUSTOM DESIGN IN SWEDEN
This Mount Fits | Holden Commodore VT VX Year(s):98-02 |
SKU | 652738 |
Barcode # | 7320286527385 |
Brand | ClicOn |
Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Angled Mount (SKU:652738), you can click on the images to open a larger version in a new tab
1.Open the glove compartment. Remove the highest screw at pos. 2. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ClicOn. 2. Press the right part of the ClicOn, with adhesive tape, into the gap at pos. 1 between the stereo and the surrounding frame. 3. Place the hole in the left part of the ClicOn over the hole at pos. 2. Screw on the screw. Close the glove compartment. The ClicOn is in place.
1.Open the glove compartment. Remove the highest screw at pos. 2. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ClicOn. 2. Press the right part of the ClicOn, with adhesive tape, into the gap at pos. 1 between the stereo and the surrounding frame. 3. Place the hole in the left part of the ClicOn over the hole at pos. 2. Screw on the screw. Close the glove compartment. The ClicOn is in place.
1.Open the glove compartment. Remove the highest screw at pos. 2. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ClicOn. 2. Press the right part of the ClicOn, with adhesive tape, into the gap at pos. 1 between the stereo and the surrounding frame. 3. Place the hole in the left part of the ClicOn over the hole at pos. 2. Screw on the screw. Close the glove compartment. The ClicOn is in place.
1.Open the glove compartment. Remove the highest screw at pos. 2. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ClicOn. 2. Press the right part of the ClicOn, with adhesive tape, into the gap at pos. 1 between the stereo and the surrounding frame. 3. Place the hole in the left part of the ClicOn over the hole at pos. 2. Screw on the screw. Close the glove compartment. The ClicOn is in place.