Adjustable Phone Holders

The chart below is for our Non-powered Holders but we also have Powered Holders for Micro USB and USB Type C connectors.

Before you order make sure you measure the width and thickness (Slot Width) of your case or device.


Item Number Holder Type Holder Width Slot Width
511230 Passive 49-63mm  6-10mm
511231 Passive 49-63mm  9-13mm
511232 Passive 49-63mm 12-16mm
511307 Passive 62-77mm  6-10mm
511308 Passive 62-77mm  9-13mm
511309 Passive 62-77mm 12-16mm
511479 Passive 75-89mm  6-10mm
511483 Passive 75-89mm  9-13mm
511484 Passive 75-89mm 12-16mm

Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).