ClicOn

Scroll for more

3870 Products Found

Subaru Outback Console Mount & MagFusion Dash Pro Kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Subaru Outback (20-26) kit: custom-designed console mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.90

Subaru WRX Right Hand Mount & MagFusion Dash Pro

With Pre-Drilled AMPS Pattern Holes

Key Features

  • The Mount without a Holder
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden

Complete Subaru WRX/Outback (22-26) kit: custom-designed right hand dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.90

Swiveling top support with retention-lock

Fits Brodit holders with tilt swivel plate 42x50mm

Key Features

  • Solutions Accessory
  • Module Upgrade Part
  • Ready To Go

Holder for the Retention-lock for Zebra TC701 Retention-lock for Honeywell CT70. Non-charging. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.

$99.90

Toyota HiAce Angled Mount-Low & Magfusion Dash Pro Kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Aukey
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Toyota HiAce (20-26) kit: custom-designed angled dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.90

Toyota HiLux Angled Mount & MagFusion Dash Pro kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Toyota HiLux (16-25) kit: custom-designed angled dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.90

Toyota HiLux Angled Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Vehicle-specific angled mount for the Toyota HiLux 12-15, paired with an Aukey MagFusion Dash Pro magnetic holder for 15W wireless charging. Custom-designed for an exact factory fit with no drilling or glue. Includes a ball joint for easy DIY setup.

$149.90

12% OFF

RRP $169.70

Toyota HiLux Centre Mount & MagFusion Dash Pro kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with MagFusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Vehicle-specific Centre Mount for the Toyota Hi-Lux (26-27), with the MagFusion magnetic phone holder and 15W wireless charging. CNC-designed for an exact dashboard fit - no drilling or glue. Includes a ball joint for easy DIY installation.

$149.90

12% OFF

RRP $169.90

Toyota LandCruiser 200 Angled Mount & MagFusion Dash Pro Kit

Complete with Ball Joint Mount NOT for LX Model

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Toyota Landcruiser 200 (16-21) kit: custom-designed angled dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling. Not for LX Model.

$149.90

12% OFF

RRP $169.90

Toyota Landcruiser 200 Console Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Vehicle-specific console mount for the Toyota Landcruiser 200 08-15, paired with an Aukey MagFusion Dash Pro magnetic holder for 15W wireless charging. Custom-designed for an exact factory fit with no drilling or glue. Includes a ball joint for easy DIY.

$149.90

12% OFF

RRP $169.70

Toyota Landcruiser 300 Console Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Toyota Landcruiser 300 (21-27) kit: custom-designed console mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.70

Toyota Prado Angled Mount & Magfusion Dash Pro Kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Toyota Prado (24-27) kit: custom-designed angled dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.90

Toyota Prado Right Hand Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Vehicle-specific right hand mount for the Toyota Prado 10-15, paired with an Aukey MagFusion Dash Pro magnetic holder for 15W wireless charging. Custom-designed for an exact factory fit with no drilling or glue. Includes a ball joint for easy DIY setup.

$149.90

12% OFF

RRP $169.70

Toyota Rav 4 Right Hand Mount & MagFusion Dash Pro kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden

A vehicle-specific mount kit for the Toyota Rav 4 Yrs: 13-18 with the MagFusion Pro Kit and a ball joint. Installs easily with no drilling required. The Mount is custom made for your vehicle for a secure, stable fit. No Dropping off.

$149.90

12% OFF

RRP $169.90

USB Cig-plug Charging Adjustable Holder - Medium

ONLY for Devices with Micro USB

Key Features

  • The Holder
  • Firm & Secure Fit
  • Dimension: Width 62-77 mm Slot 12-16 mm
  • Dual Cig Plug USB-A Ports: QC 3.0A + 2.4A
  • AMPS Pattern Mount Holes
  • Landscape to Portrait Viewing

Adjustable charging car phone holder. Fits 62-77mm wide, 12-16mm thick. Cig-plug charger included. 360-degree tilt swivel. Only for Devices with Micro USB. AMPS pattern holes. Mount sold separately.

$119.90

Volkswagen Amarok Angled Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Volkswagen Amarok (11-16) kit: custom-designed angled dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.70

Volkswagen Amarok Centre Mount & MagFusion Dash Pro Kit

Complete with MagFusion wireless charging and ball joint

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Complete Volkswagen Amarok (17-23) kit: custom-designed centre dash mount, the MagFusion 15W magnetic holder and charger with cooling fan and MagSafe compatibility, plus a ball joint mount. No holes, no drilling.

$149.90

12% OFF

RRP $169.70

Volvo XC40/EX40/EC40 & C40 Angled Mount & Magfusion Dash Pro Kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Vehicle-specific Angled Mount for the Volvo XC40/EX40/EC40 & C40, with the MagFusion magnetic phone holder and 15W wireless charging. CNC-designed for an exact dashboard fit - no drilling or glue. Includes a ball joint for easy DIY install.

$149.90

12% OFF

RRP $169.90

Volvo XC90 Angled Mount & Magfusion Dash Pro Kit

Complete with Ball Joint Mount

Key Features

  • Dashmount with Magfusion Pro Kit
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden & PRC

Vehicle-specific Angled Mount for the Volvo XC90 15-24 with the MagFusion magnetic phone holder and 15W wireless charging. CNC-designed for an exact dashboard fit - no drilling or glue. Includes a ball joint for easy DIY install.

$149.90

12% OFF

RRP $169.90

Wall Plug Charger

Compatible with Zebra ET50X Tablet Series

Key Features

  • Cig-Plug Charger, with DC power plug.
  • Input Voltage: 12V, 2.17A
  • Input Voltage: 24V,   1.3A
  • Output Voltage: 12.6V, 2.5A

Charging holder for the Zebra ET5X Series Module Parts. Cig-plug charger included. Compatible with Zebra ET50X Tablet Series. AMPS pattern holes. Mount sold separately.

$99.90

Wall Plug Charger

Compatible with Zebra ET4X Tablet Series

Key Features

  • Wall Power Charger.
  • Input Voltage: 100VAC - 240VAC
  • Output Voltage: 12V, 3AMP

 

Charging holder for the Compatible with: Zebra ET40 10 Zebra ET40 8 Zebra ET45 10 Zebra ET45 8. Compatible with Zebra ET4X Tablet Series. AMPS pattern holes. Mount sold separately.

$99.90

Wireless Adjustable Charging Holder - Cig Plug

Fits Device WITH or WITHOUT a Slim Case

Key Features

  • The Holder without a Mount
  • Firm & Secure Fit
  • Qi Wireless 15W EPP Certified
  • Dual USB-A Ports: QC 3.0A + 2.4A
  • AMPS Pattern Mount Holes
  • Landscape to Portrait Viewing

Qi wireless 15W car holder (EPP certified) for iPhone 11-17 & Samsung Galaxy S8-S26, and other Qi phones 61-83mm wide, used with or without a slim case. Dual USB-A cig-plug charger, 360-degree tilt swivel. Mount sold separately.

$169.90

Wireless Adjustable Charging Holder-Hard Wire Install

Fits Device WITH or WITHOUT a Slim Case

Key Features

  • The Holder without a Mount
  • Firm & Secure Fit
  • Qi Wireless 15W EPP Certified
  • Hardwire Install
  • AMPS Pattern Mount Holes
  • Landscape to Portrait viewing

Hard-wired Qi wireless 15W car holder (EPP certified) for wireless charging phones 61-83mm wide and 6-11mm thick, with or without a slim case. Dual USB hard-wire charger, 360-degree tilt swivel. Mount sold separately.

$172.90

Angled Mount

With Pre-Drilled AMPS Pattern Holes

Key Features

  • The Mount without a Holder
  • NO Holes, NO Drilling
  • Easy Install
  • Custom Design
  • Made in Sweden

Custom-designed Kia Sportage (11-16 1/2) angled dash mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. Ready for you to add the holder made for your phone or other device (screws provided).

$49.90