Cart
Wireless Adjustable Charging Holder - Cig Plug
Fits Device WITH or WITHOUT a Slim Case
THE HOLDER WITHOUT A MOUNT (Choose your Mount Separately)
- Attach the Holder to the Mount using the screws provided.
DESIGNED TO BE USED WITH OR WITHOUT A CASE
- Dimensions: Width 61-83mm Slot 6-11mm
- If you are using a case, measure the device's width and thickness within the case BEFORE ORDERING.
FIRM & SECURE FIT
- Customised design to firmly fit your phone with or without a Case.
Qi WIRELESS 15W EPP CERTIFIED
- Built to the highest standard, the Wireless Charging Holders are Qi Certified. Built-in circuit protection against overheating. Able to regulate from 5 / 7.5 / 10 and 15 Watts with LED charge status.
DUAL USB - A PORTS: QC 3.0A + 2.4A
- Dual USB Port Cig-Plug Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS PATTERN MOUNT HOLES
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
LANDSCAPE TO PORTRAIT
- All ClicOn holders come with a tilt swivel that can rotate 360° and tilt the holder 17° in any direction for optimal viewing and to avoid light reflection.
Please Note: The USB ports in vehicles only provide a 5 Vdc power output, but the Qualcomm Cig-Plug Charger included with this holder provides 5 Vdc / 9 Vdc / 12Vdc Outputs to support the 7.5W / 10W / 15W fast-charging rates. We recommend not connecting the wireless charging holder directly to the vehicle's USB ports. This is a 15W fast charging holder when used with the Cig-Plug Charger. Fast charging is device-dependent.
- The Holder without a Mount
- Firm & Secure Fit
- Qi Wireless 15W EPP Certified
- Dual USB-A Ports: QC 3.0A + 2.4A
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | Works with any Wireless Charging Phone with a footprint of Width 61-83mm & Thickness of 6-11mm. |
| SKU | 718300 |
| Barcode # | 7320287183009 |
| Brand | ClicOn |
| Shipping Weight | 0.1900kg |
Below you will find the installation instructions for the Wireless Adjustable Charging Holder - Cig Plug (SKU:718300), you can click on the images to open a larger version in a new tab
Step 1
1. To adjust the holder for your device: Loosen the screws on the holder's front side, so the holder's sides can be adjusted. Place the device in the holder and press the sides together, so the device is firmly in place. Adjust the height so that the mark showing the centre of the charging coil is centred over the unit's charging coil. Tighten the screws on the front side of the holder
Step 2
2. Loosen the screw in the centre of the mount to remove the tilt swivel attaching plate on the back. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate, so the tilt swivel fits. Screw the mount onto the attaching plate.
Step 3
3. Place the device over the adapter mount and press it straight down so it slides into place. To remove it, press it straight upward and slide it out from the adapter mount.
Step 4
4. The holder is in place.
Warranty
One Year Warranty applies to products purchased directly from HoldMyPhone or an authorised re-seller.
During this warranty period if the product is defective in workmanship or materials HoldMyPhone will replace it with a model of equal value.
Damages caused by improper use, accident, unauthorized repair or modifications are not covered under this warranty.
Purpose-built car phone holder for the Apple iPhone 12 to 17 Series & Android Phones with MagSafe, for a firm, secure fit, designed to fit the device without a case. Easy one-hand docking and removal for reliable everyday use, with wireless charging.
Our Price
$169.90
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy
Australian Owned & Operated
