Hard Wired Charging Adjustable Holder
Size: Width 75-89mm Slot 2-10mm
This hardwired charging car phone holder is made for the Apple iPhone X, and suits phones 75 to 89mm wide and 2 to 10mm thick. Measure the width and thickness with the case on before ordering.
It is hardwired into the vehicle's power, which keeps the 12V socket free and the cabling out of sight. A professional installer is recommended. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit and hold your smartphone securely.
Designed to be used with standard skins or covers
- Dimension: To fit Width: 75-89 mm, Thickness: 2-10mm.
- If you are using a skin or cover, measure the Height, Width and Thickness of the device with that skin or cover on. before ordering.
Hardwire install
- Dual USB Port Hard-Wire Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone X /Xs/ Xs Max / 11/ 11Pro.
- The Holder with a Mount
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone X /Xs/ Xs Max / 11/ 11Pro |
| SKU | 527667 |
| Barcode # | 7320285276673 |
| Brand | ClicOn |
| Shipping Weight | 0.0260kg |
Below you will find the installation instructions for the Hard Wired Charging Adjustable Holder (SKU:527667), you can click on the images to open a larger version in a new tab
Step 3
3. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place but still can be adjusted. NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder and STRAIGHT UPWARD out of the holder.
Hardwired charging car phone holder for the Apple iPhone X. Fits 75-89mm wide, 2-10mm thick. Hardwire install. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated


