Adjustable Holder with Cable Connect
Size: Width 75-89mm Slot 2-10mm
This car phone holder is made for the Apple iPhone X, and suits phones 75 to 89mm wide and 2 to 10mm thick. Measure the width and thickness with the case on before ordering.
It is a non-charging holder, so there is nothing to wire in. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit and hold your smartphone securely.
Compatible with Apple Lightning cable
- The Apple Part Number for the USB lighting Cable is MD818ZM/A. When using the lighting-to-USB cable with this holder, you can charge your iPhone by connecting it to the car's USB socket or a plugin charger. The Cable is Not Included.
Designed to be used with standard skins or covers
- Dimensions: Width: 75-89 mm, Thickness: 2-10 mm.
- If you are using a skin or cover, measure the Width and Thickness of the device with the skin or cover before ordering.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone X / XR / Xs / Xs Max /11.
- The Holder
- Firm & Secure Fit
- Compatible with Apple Lightning Cable
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone X / XR / Xs / Xs Max /11 |
| SKU | 514667 |
| Barcode # | 7320285146679 |
| Brand | ClicOn |
| Shipping Weight | 0.1210kg |
Below you will find the installation instructions for the Adjustable Holder with Cable Connect (SKU:514667), you can click on the images to open a larger version in a new tab
Step 3
3. Loosen the screw in the centre of the holder to remove the tilt swivel attaching plate on the back. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firmly at first, then loosen it a bit, so the holder is firmly in place but still can be adjusted.
Car phone holder for the Apple iPhone X. Fits 75-89mm wide, 2-10mm thick. Non-charging. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated


