THE HOLDER
FIRM & SECURE FIT
DESIGNED TO BE USED WITH A CASE
DUAL USB - A PORTS: QC 3.0A + 2.4A
AMPS PATTERN MOUNT HOLES
Mounting the Holder onto a Car Dashboard Mount is made easy with the AMPS hole mounting plate.
LANDSCAPE TO PORTRAIT
Please Note: If your car has a USB socket, you can disconnect the cig-plug from the cable to connect directly to the USB connector in your vehicle to Sync audio files from your device into your head unit. The car stereo must support this feature. Test that your stereo is compatible by connecting your device to the stereo with the USB/charging cable that comes with your device.
| This Holder Fits | Width 62-77 mm, Slot 12 -16 mm |
| SKU | 521842 |
| Barcode # | 7320285218420 |
| Brand | ClicOn |
| Shipping Weight | 0.1600kg |
Below you will find the installation instructions for the USB Cig-plug Charging Adjustable Holder (SKU:521842), you can click on the images to open a larger version in a new tab
1. To adjust the holder for your device: Loosen the screws on the holder's front side, so the holder's sides can be adjusted.
2. Place the device in the holder and press the sides together, so the device is firmly in place. Adjust the positioning of the charging connector, so it connects properly to the phone. Lock the charging connector into position by screwing the screw into the hole on the side of the charging connector block. Remove the device carefully. Tighten the screws on the front side of the holder.
3. To install the holder: Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching container in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, at the same time, tighten the screw, so the holder is pulled toward the tilt swivel. Tighten the screw firmly at first, then loosen it a bit, so the holder is firmly in place but still can be adjusted.
4. The holder is in place.
One Year Warranty applies to products purchased directly from HoldMyPhone or an authorised re-seller.
During this warranty period if the product is defective in workmanship or materials HoldMyPhone will replace it with a model of equal value.
Damages caused by improper use, accident, unauthorized repair or modifications are not covered under this warranty.
USB Cig-plug Charging Adjustable Holder. ONLY for Devices with Type C USB. Engineered for a secure, stable hold and dependable everyday use.
