USB Cig-plug Charging Adjustable Holder
ONLY for Devices with Type C USB
This adjustable charging car phone holder suits phones 62 to 77mm wide and 6 to 10mm thick, including the Samsung Galaxy S24 and Samsung Galaxy S25. Measure the width and thickness with the case on before ordering.
It charges through the included cig-plug charger, so the device is topped up from the vehicle's 12V socket. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit and hold your phone securely.
Designed to be used with a case
- Dimension: Width 62-77 mm Slot 6-10 mm.
- If you are using a case, measure the Width and Thickness of the device with the case on before ordering.
Dual USB-A ports: QC 3.0A + 2.4A
- Dual USB Port Cig-Plug Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and to avoid light reflection.
Fits
- Width 62-77 mm, Slot 6 -10mm.
Please note: If your car has a USB socket, you can disconnect the cigarette plug from the cable and connect directly to the USB connector in your vehicle to Sync audio files from your device into your head unit. The car stereo must support this feature. Test that your stereo is compatible by connecting your device to the stereo with the USB/charging cable that comes with your device.
- The Holder without a Mount
- Firm & Secure Fit
- Dimension: Width 62-77 mm Slot 6-10mm
- Dual Cig Plug USB-A Ports: QC 3.0A + 2.4A
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | Width 62-77 mm, Slot 6 -10mm |
| SKU | 521840 |
| Barcode # | 7320285218406 |
| Brand | ClicOn |
| Shipping Weight | 0.1600kg |
Below you will find the installation instructions for the USB Cig-plug Charging Adjustable Holder (SKU:521840), you can click on the images to open a larger version in a new tab
Step 2
2. Place the device in the holder and press the sides together, so the device is firmly in place. Adjust the positioning of the charging connector, so it connects properly to the phone. Lock the charging connector into position by screwing the screw into the hole on the side of the charging connector block. Remove the device carefully. Tighten the screws on the front side of the holder.
Step 3
3. To install the holder: Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching container in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firmly at first, then loosen it a bit, so the holder is firmly in place but still can be adjusted.
Adjustable charging car phone holder for the Samsung Galaxy S24 / Samsung Galaxy S25. Fits 62-77mm wide, 6-10mm thick. Cig-plug charger included. 360-degree tilt swivel. Only for Devices with Type C USB. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated

