Non Charging Adjustable Holder - Medium
Designed to be used WITH a Case
This adjustable car phone holder suits phones 62 to 77mm wide and 6 to 10mm thick in a case, including the Samsung Galaxy S24 and Samsung Galaxy S25. Measure the width and thickness with the case on before ordering.
It is a non-charging holder, so there is nothing to wire in. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit your phone.
Designed to be used with a case
- Dimension: Width 62-77 mm Slot 6-10 mm.
- If you are using a case, measure the width and thickness of the device within the case before ordering.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and to avoid light reflection.
Fits
- Width 62-77 mm, Slot 6 -10mm.
- The Holder without a Mount
- Firm & Secure Fit
- Dimension: Width 62-77 mm Slot 6-10 mm
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | Width 62-77 mm, Slot 6 -10mm |
| SKU | 511307 |
| Barcode # | 7320285113077 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Non Charging Adjustable Holder - Medium (SKU:511307), you can click on the images to open a larger version in a new tab
Step 3
3. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firmly at first, then loosen it a bit, so the holder is firmly in place, but still can be adjusted.
Adjustable car phone holder for the Samsung Galaxy S24 / Samsung Galaxy S25, with a case. Fits 62-77mm wide, 6-10mm thick. Non-charging. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated


