Hard Wired Charging Adjustable Holder
Size: Width 80-94 mm Slot 9-13 mm.
This hardwired charging car phone holder is made for the Apple iPhone Xs Max, and suits phones 80 to 94mm wide and 9 to 13mm thick. Measure the width and thickness with the case on before ordering.
It is hardwired into the vehicle's power, which keeps the 12V socket free and the cabling out of sight. A professional installer is recommended. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Firm and secure fit
- Customised design to firmly fit and hold your smartphone securely.
Designed to be used with standard skins or covers
- Dimension: To fit Width: 80-94 mm, Thickness 9-13 mm.
- If you are using a skin or cover, measure the Height, Width and Thickness of the device with that skin or cover on. before ordering.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone Xs Max/ iPhone 11 Pro/ iPhone 11 Pro Max.
Please note: The power cable has an in-line 12/24 volt charge regulator that allows connection directly to the vehicle's power system. The output is 5 Volts. A professional installer is recommended.
- The Holder without a Mount
- AMPS Pattern Mount Holes
- Firm & Secure Fit
- Dual Hard-Wire USB-A Ports: QC 3.0A + 2.4A
- Landscape to Portrait viewing
| This Holder Fits | iPhone Xs Max/ iPhone 11 Pro/ iPhone 11 Pro Max |
| SKU | 727084 |
| Barcode # | 7320287270846 |
| Brand | ClicOn |
| Shipping Weight | 0.3000kg |
Below you will find the installation instructions for the Hard Wired Charging Adjustable Holder (SKU:727084), you can click on the images to open a larger version in a new tab
Step 2
1. To adjust the holder for your device: Loosen the screws on the holder's front side, so the holder's sides can be adjusted. Place the device in the holder and press the sides together, so the device is firmly in place. Tighten the screws on the front side of the holder. 2. Loosen the screw in the centre of the holder to remove the tilt swivel attaching plate on the back.
Step 3
3. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw, so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place but still can be adjusted. NOTE! It is important to slide the device STRAIGHT DOWNWARD into the holder and STRAIGHT UPWARD out of the holder.
Hardwired charging car phone holder for the Apple iPhone Xs Max. Fits 80-94mm wide, 9-13mm thick. Hardwire install. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated

