Attention! Read all instructions before attaching the ClicOn
The ClicOn can be placed in desired position within the indicated area, but the position shown in the picture is recommended.
- 1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the ClicOn.
- 2. Press the lower part of the ClicOn, with adhesive tape, into the gap at pos. 1 between the dashboard and the panel surrounding the stereo.
- 3. Press forward on the ClicOn so the upper edge hooks into the gap at pos. 2 between the front and the back part of the dashboard.