Cup Holder for Cans and Bottles
With Pre-Drilled Mounting Holes
Fit Details
Fits to Dashmounts or your own solution.
$24.90
This angled dash mount is custom designed for the Suzuki Grand Vitara XL-7 (2002 to 2002) and Vitara (1999 to 2004). These models share the same dashboard, so one mount fits them all. It fits into the shape of your dashboard, so your phone or device sits in clear view and within easy reach, and it stays put on rough roads. There are no holes to drill and no glue.
It is the mount on its own. You choose the holder to go with it, and it screws straight onto the mount with the screws provided. We make holders for phones, tablets, UHF radios and navigation units, so you can set the car up for whatever you carry and swap the holder later if your device changes.
| This Mount Fits | Suzuki Grand Vitara XL-7 Year(s):02-02 Suzuki Vitara Year(s):99-04 |
| SKU | 652641 |
| Barcode # | 7320286526418 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Angled Mount (SKU:652641), you can click on the images to open a larger version in a new tab
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn. 2. Press the upper and the lower part of the ClicOn against each other. Place the ClicOn as shown in the picture. 3. Press the upper part of the ClicOn into the gap at pos. 1. between the control panel and the surrounding frame. Press the lower part of the ClicOn into the gap at pos. 2.between the control panel and the surrounding frame. . Adjust the ClicOn until you hear or feel/see it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn. 2. Press the upper and the lower part of the ClicOn against each other. Place the ClicOn as shown in the picture. 3. Press the upper part of the ClicOn into the gap at pos. 1. between the control panel and the surrounding frame. Press the lower part of the ClicOn into the gap at pos. 2.between the control panel and the surrounding frame. . Adjust the ClicOn until you hear or feel/see it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn. 2. Press the upper and the lower part of the ClicOn against each other. Place the ClicOn as shown in the picture. 3. Press the upper part of the ClicOn into the gap at pos. 1. between the control panel and the surrounding frame. Press the lower part of the ClicOn into the gap at pos. 2.between the control panel and the surrounding frame. . Adjust the ClicOn until you hear or feel/see it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn. 2. Press the upper and the lower part of the ClicOn against each other. Place the ClicOn as shown in the picture. 3. Press the upper part of the ClicOn into the gap at pos. 1. between the control panel and the surrounding frame. Press the lower part of the ClicOn into the gap at pos. 2.between the control panel and the surrounding frame. . Adjust the ClicOn until you hear or feel/see it snap into place.
Custom-designed Suzuki Grand Vitara XL-7 (2002)/Vitara (99-04) angled dash mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. Ready for you to add the holder made for your phone or other device (screws provided).



