This console mount is custom designed for the Lexus RX Series (2010 to 2015). It fits into the shape of your centre console, so your phone or device sits in clear view and within easy reach, and it stays put on rough roads. There are no holes to drill and no glue.
It is the mount on its own. You choose the holder to go with it, and it screws straight onto the mount with the screws provided. We make holders for phones, tablets, UHF radios and navigation units, so you can set the car up for whatever you carry and swap the holder later if your device changes.
| This Mount Fits | Lexus RX Series Year(s):10-15 |
| SKU | 634710 |
| Barcode # | 7320286347105 |
| Brand | ClicOn |
| Shipping Weight | 0.1400kg |
Below you will find the installation instructions for the Console Mount (SKU:634710), you can click on the images to open a larger version in a new tab
1. The gap/seam underneath the center console is very tight so you have to move a gap opener along the gap step by step, to widen the gap. Press the thin end of one of the enclosed gap openers into the gap as shown in the picture. Press the second gap opener into the gap next to the first gap opener. Pull out the first gap opener and insert it into the gap next to the second gap opener, and continue doing this until you have one gap opener in the mid area of the console. Pull out the other gap opener. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the cover of adhesive tape on the ClicOn.
2. Press the gap opener into the gap in the console sidewall and press forward on the thick end of the gap opener to bend the gap wider. Insert the curved edge on the upper part of the ClicOn into the gap next to the gap opener.
3. Support the placement of the upper part of the ClicOn with you fingers and at the same time press forward on the lower part of the ClicOn with your thumb so the angled edge hooks into the gap next to the gap opener. Press until you see or hear/feel it click into place. Pull out the gap openers.
4. The ClicOn is in place.
Custom-designed Lexus RX Series (10-15) console mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. Ready for you to add the holder made for your phone or other device (screws provided).
