This centre dash mount is custom designed for the Land Rover Range Rover Evoque (2019 to 2023). It fits into the shape of your dashboard, so your phone or device sits in clear view and within easy reach, and it stays put on rough roads. There are no holes to drill and no glue.
It is the mount on its own. You choose the holder to go with it, and it screws straight onto the mount with the screws provided. We make holders for phones, tablets, UHF radios and navigation units, so you can set the car up for whatever you carry and swap the holder later if your device changes.
| This Mount Fits | Land Rover Range Rover Evoque Year(s): 19-23 |
| SKU | 655543 |
| Barcode # | 7320286555432 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
| Shipping Width | 0.130m |
| Shipping Height | 0.200m |
| Shipping Length | 0.080m |
| Shipping Cubic | 0.002080000m3 |
Below you will find the installation instructions for the Centre Mount (SKU:655543), you can click on the images to open a larger version in a new tab
1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the top of the ClicOn all the way into the vair ent opening until the tab on the top of the ClicOn rests against the dashboard. 2. Press the ClicOn upward/forward and hook the grooved lower edge over the lower edge of the air vent. 3. The ClicOn is in place.
1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the top of the ClicOn all the way into the vair ent opening until the tab on the top of the ClicOn rests against the dashboard. 2. Press the ClicOn upward/forward and hook the grooved lower edge over the lower edge of the air vent. 3. The ClicOn is in place.
1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the top of the ClicOn all the way into the vair ent opening until the tab on the top of the ClicOn rests against the dashboard. 2. Press the ClicOn upward/forward and hook the grooved lower edge over the lower edge of the air vent. 3. The ClicOn is in place.
1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Peel off the adhesive tape cover on the ClicOn. Press the top of the ClicOn all the way into the vair ent opening until the tab on the top of the ClicOn rests against the dashboard. 2. Press the ClicOn upward/forward and hook the grooved lower edge over the lower edge of the air vent. 3. The ClicOn is in place.
Custom-designed Land Rover Range Rover Evoque (19-23) centre dash mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. Ready for you to add the holder made for your phone or other device (screws provided).
