Non Charging Adjustable Holder
Size: Width 62-77 mm Slot 2-10 mm
This car phone holder is made for the Apple iPhone SE 2nd Gen, and suits phones 62 to 77mm wide and 2 to 10mm thick. Measure the width and thickness with the case on before ordering.
It is a non-charging holder, so there is nothing to wire in. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
The holder without the mount
- Attach the Holder to the Mount using the screws provided.
Firm and secure fit
- Customised design to firmly fit your phone.
Designed to be used with slim skins or covers
- Dimension: To fit Width 62-77 mm Slot 2-10 mm.
- If you are using a skin or cover, measure the width and thickness of the device within the skin or cover before ordering. If the overall width is 62-77 mm and the thickness is 6-10 mm, this holder can be adjusted to fit.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone Xs/SE 2nd Gen.
- The Holder without a Mount
- Firm & Secure Fit
- Designed to be used with Slim Skins or Covers
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone Xs/SE 2nd Gen |
| SKU | 511666 |
| Barcode # | 7320285116665 |
| Brand | ClicOn |
| Shipping Weight | 0.1600kg |
| Unit Of Measure | ea |
Below you will find the installation instructions for the Non Charging Adjustable Holder (SKU:511666), you can click on the images to open a larger version in a new tab
Step 3
3. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firmly first, then loosen it a bit, so the holder is firmly in place but still can be adjusted.
Car phone holder for the Apple iPhone SE 2nd Gen. Fits 62-77mm wide, 2-10mm thick. Non-charging. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated


