Non Charging Adjustable Holder
Size: Width 62-77mm Slot 6-10mm
This car phone holder is made for the Apple iPhone 12 Mini, and suits phones 62 to 77mm wide and 6 to 10mm thick. Measure the width and thickness with the case on before ordering.
It is a non-charging holder, so there is nothing to wire in. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit your smartphone.
Designed to be used with slim cases
- Dimension: To fit Width 62-77 mm Slot 6-10 mm.
- If you are using a skin or cover, measure the width and thickness of the device within the skin or cover before ordering. This holder can be adjusted to fit if the overall width is 62-77 mm and the thickness is 6-10 mm.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone 5 /5C /5S /12 Mini iPhone 13 Mini.
- The Holder without the Mount
- Firm & Secure Fit
- Designed to be used with Slim Cases
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone 5 /5C /5S /12 Mini iPhone 13 Mini
|
| SKU | 511428 |
| Barcode # | 7320285114289 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Non Charging Adjustable Holder (SKU:511428), you can click on the images to open a larger version in a new tab
Step 3
3. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firmly first, then loosen it a bit, so the holder is firmly in place but still can be adjusted.
Car phone holder for the Apple iPhone 12 Mini. Fits 62-77mm wide, 6-10mm thick. Non-charging. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated


