HMP 2-Part Solution Builder

MountsClick here to add a mount to the builder
HoldersClick here to add a holder to the builder
AccessoriesClick here to add an optional accessory to the builder
 

ClicOn Vibration Dampener

For installations weighing up to 300g.

SKU:215882

An accessory for reducing vibrations and chocks when using your device in rough environments. Designed to be placed between the holder and the mounting platform.

Can be used for installations weighing up to 300g.

Please read all of the instructions and look at the pictures before attaching the ClicOn. This ClicOn can be mounted along the whole width of the panel.

1. Mount the vibration pads onto a holder with tilt swivel: Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back. Place the vibration pads onto the back of the attaching plate. Use the short screw with small head to attach the vibration pads onto the mounting plate. Continue to step 2.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place, for mounting surface ≤ 3mm thick use the short screw. place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw the holder onto the attaching plate. Tighten the screw so the holder is firmly in place, but still can be adjusted.

3. Mount the vibration pads onto a holder without tilt swivel: Place the vibration pads on the backside of the holder. Use the short screw with a small head to fasten the pad onto the holder. Place the holder onto the desired position and screw into place, for mounting surface ≤ 3mm thick use the short screw.

4. Mount the vibration pads onto a MultiMoveClip: Place the vibration pads onto the backside of the MultiMoveClip. Use the short screw with a small head to fasten the pad onto the MultiMoveClip. Place the MultiMoveClip onto the desired position and screw into place, for mounting surface ≤ 3mm thick use the short screw.

Vibration dampener, soft. For installations weighing up to 300g. 


SKU 215882
Barcode # 7320282158828
Brand ClicOn

Be The First To Review This Product!

Help other Neovox Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

$54.90


Calculate Shipping


More From This Category


SKU: 215162

ClicOn Angled Plate 50x50x5-14 mm Angled 10°
With Pre-Drilled AMPS Pattern Holes

$12.00

More Info
Not yet rated
SKU: 215163

ClicOn Angled Plate 50x50x5-18 mm Angled 15°
With Pre-Drilled AMPS Pattern Holes

$12.00

More Info
Not yet rated
SKU: 215228

ClicOn Angled Plate Mount

$48.99

More Info
Not yet rated
SKU: 215231

ClicOn Arkon Single T Adaptor with Tilt Swivel
With Pre-Drilled AMPS Pattern Holes

$27.50

More Info
Not yet rated
SKU: 215053

ClicOn Device Mounting Adapter
With Pre-Drilled AMPS Pattern Holes

$27.50

More Info
Not yet rated
SKU: 215451

ClicOn Distance plate, 42x 50x19 mm
With Pre-Drilled AMPS Pattern Holes

$12.00

More Info
Not yet rated
SKU: 213053

ClicOn Dual Mounting Plate
With Pre-Drilled AMPS Pattern Holes

$11.00

More Info
Not yet rated
SKU: 213020

ClicOn Dual Tilt Swivel Mounting Plate
With Pre-Drilled AMPS Pattern Holes

$48.99

More Info
Not yet rated