Cup Holder for Cans and Bottles
With Pre-Drilled Mounting Holes
Fit Details
Fits to Dashmounts or your own solution.
$24.90
This centre dash mount is custom designed for the BMW 316-330 E90/E91/E92/E93 (2005 to 2012). It fits into the shape of your dashboard, so your phone or device sits in clear view and within easy reach, and it stays put on rough roads. There are no holes to drill and no glue.
It is the mount on its own. You choose the holder to go with it, and it screws straight onto the mount with the screws provided. We make holders for phones, tablets, UHF radios and navigation units, so you can set the car up for whatever you carry and swap the holder later if your device changes.
Please note: for Cars without Navigation & Wood Grain.
| This Mount Fits | BMW 316-330 E90/E91/E92/E93 Year(s):05-12 |
| SKU | 653599 |
| Barcode # | 7320286535991 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Centre Mount (SKU:653599), you can click on the images to open a larger version in a new tab
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. 3. Press the grooved edge on the lower part of the ClicOn into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener. 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the ClicOn so the angled upper edge hooks into the gap next to the gap opener. Pull out the gap opener. 4. The ClicOn is in place.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. 3. Press the grooved edge on the lower part of the ClicOn into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener. 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the ClicOn so the angled upper edge hooks into the gap next to the gap opener. Pull out the gap opener. 4. The ClicOn is in place.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. 3. Press the grooved edge on the lower part of the ClicOn into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener. 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the ClicOn so the angled upper edge hooks into the gap next to the gap opener. Pull out the gap opener. 4. The ClicOn is in place.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the frame surrounding the control panel, to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. 3. Press the grooved edge on the lower part of the ClicOn into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener. 3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press forwards on the ClicOn so the angled upper edge hooks into the gap next to the gap opener. Pull out the gap opener. 4. The ClicOn is in place.
Custom-designed BMW 316-330 E90/E91/E92/E93 (05-12) centre dash mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. For Cars without Navigation & Wood Grain. Add the holder made for your device.



