This charging car phone holder is made for the Apple iPhone 11 Pro Max. It is moulded to the shape of the device, so it docks and releases with one hand and stays firmly in place on rough roads.
It charges through the included cig-plug charger, so the device is topped up from the vehicle's 12V socket. A tilt swivel turns the screen from portrait to landscape and angles it away from glare. A top support adds an extra hold for rough roads.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Please note: If your car has a USB socket, you can disconnect the cigarette plug from the cable and connect directly to the USB connector in your vehicle to Sync audio files from your device into your head unit. The car stereo must support this feature. Test that your stereo is compatible by connecting your device to the stereo with the USB/charging cable that comes with your device.
| This Holder Fits | iPhone Xs Max/ 11 Pro Max/ 12 Pro Max iPhone 13 Pro Max |
| SKU | 521663 |
| Barcode # | 7320285216631 |
| Brand | ClicOn |
| Shipping Weight | 0.2100kg |
| Shipping Width | 0.130m |
| Shipping Height | 0.200m |
| Shipping Length | 0.060m |
| Shipping Cubic | 0.001560000m3 |
Below you will find the installation instructions for the USB Cig-plug Charging Adjustable Holder (SKU:521663), you can click on the images to open a larger version in a new tab
1. Loosen the screw in the centre of the holder to remove the tilt swivel attaching plate on the back.
2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but it can still be adjusted.
3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards, so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, and at the same time pull the device out and down from the holder.
4. The holder is in place.
Charging car phone holder for the Apple iPhone 11 Pro Max. Cig-plug charger included. 360-degree tilt swivel. Top Support for an Extra Firm Hold. AMPS pattern holes. Mount sold separately.
