Charging Padded Holder - Hard Wire Install
Fits Device WITHOUT a Case
This hardwired charging car phone holder is made for the Apple iPhone X without a case. It is moulded to the shape of the device, so it docks and releases with one hand and stays firmly in place on rough roads.
It is hardwired into the vehicle's power, which keeps the 12V socket free and the cabling out of sight. A professional installer is recommended. A tilt swivel turns the screen from portrait to landscape and angles it away from glare.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit your smartphone without a Case.
No scratches
- The holder is padded with a plush coating, protecting your device from scratches.
Hardwire install
- Dual USB Port Hard-Wire Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone X/Xs Without a Case.
- The Holder without a Mount
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone X/Xs Without a Case |
| SKU | 527997 |
| Barcode # | 7320285278042 |
| Brand | ClicOn |
| Shipping Weight | 0.2500kg |
Below you will find the installation instructions for the Charging Padded Holder - Hard Wire Install (SKU:527997), you can click on the images to open a larger version in a new tab
Step 2
1. Loosen the screw in the centre of the holder to remove the tilt swivel attaching plate on the back. 2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel.
Step 3
3. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed; at the same time, tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but it can still be adjusted.
Hardwired charging car phone holder for the Apple iPhone X, without a case. Hardwire install. 360-degree tilt swivel. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated

