HMP 2-Part Solution Builder
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Please read all of the instructions and look at the pictures before attaching the ClicOn. NOTE! It is very important to place the ClicOn exactly as shown in the pictures.
Part 1. Attaching part (the smallest part)
Part 2. ClicOn face plate.
1. Peel off the cover of the adhesive tape on Part 1. Press the angled edge on Part 1 into the gap between the control panel and the surrounding frame.
2. Press part 1 away from the steering wheel so the angled edge hooks behind the control panel. Press forwards on the left side so the adhesive tape attaches.
3. Open up the predrilled holes in Part 2. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.
4. The ClicOn is in place.
|This Mount Fits||
Scania P-Series Year(s):05-17