Cup Holder for Cans and Bottles
With Pre-Drilled Mounting Holes
Fit Details
Fits to Dashmounts or your own solution.
$24.90
This angled dash mount is custom designed for the Daihatsu Terios DX SX (1998 to 2000). It fits into the shape of your dashboard, so your phone or device sits in clear view and within easy reach, and it stays put on rough roads. There are no holes to drill and no glue.
It is the mount on its own. You choose the holder to go with it, and it screws straight onto the mount with the screws provided. We make holders for phones, tablets, UHF radios and navigation units, so you can set the car up for whatever you carry and swap the holder later if your device changes.
| This Mount Fits | Daihatsu Terios DX SX Year(s):98-00 |
| SKU | 652638 |
| Barcode # | 7320286526388 |
| Brand | ClicOn |
| Shipping Weight | 0.1000kg |
Below you will find the installation instructions for the Angled Mount (SKU:652638), you can click on the images to open a larger version in a new tab
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn.2. Place the ClicOn as shown in the picture. Press the upper and the lower part of the ClicOn against one another.3. Press the angled edges of the ClicOn into the gaps at pos.1. and pos. 2.between the control panel and the console frame. Press forward on the ClicOn until you see/hear/feel it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn.2. Place the ClicOn as shown in the picture. Press the upper and the lower part of the ClicOn against one another.3. Press the angled edges of the ClicOn into the gaps at pos.1. and pos. 2.between the control panel and the console frame. Press forward on the ClicOn until you see/hear/feel it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn.2. Place the ClicOn as shown in the picture. Press the upper and the lower part of the ClicOn against one another.3. Press the angled edges of the ClicOn into the gaps at pos.1. and pos. 2.between the control panel and the console frame. Press forward on the ClicOn until you see/hear/feel it snap into place.
1. Clean the surface at pos. 1. and pos. 2.with the enclosed alcohol pad. Peel off both adhesive tape covers on the ClicOn.2. Place the ClicOn as shown in the picture. Press the upper and the lower part of the ClicOn against one another.3. Press the angled edges of the ClicOn into the gaps at pos.1. and pos. 2.between the control panel and the console frame. Press forward on the ClicOn until you see/hear/feel it snap into place.
Custom-designed Daihatsu Terios DX SX (98-00) angled dash mount, CNC-machined in Sweden for a solid, secure fit. No holes, no drilling, no glue. Ready for you to add the holder made for your phone or other device (screws provided).



