Mounts

There is a ClicOn mount for virtually any application. Can be used to mount a holder into a car, truck, commercial vehicle, retail/showroom space, on a bike, golf buggy, wheelchair, etc. No dismantling or drilling is necessary.

The ClicOn mounts are easily self-installed. Full installation instructions come with each mount. There is also a very high-grade, heavy duty range of pedestal mounts that are worth checking out if you are looking for a robust solution for trucks, vans or other rugged applications.

 

Is this ClicOn mounting system legal when installed in a vehicle?

Yes! When you use a ClicOn holder and ClicOn dashmount kit you are complying with the driving rules for mobile phones, in every state and territory of Australia.

 

What is the product warranty?

12 month warranty applies to products purchased directly from Neovox Pty Ltd or an authorised re-seller. During this warranty time if the product is defective in workmanship or materials Neovox will replace it for a model of equal value. Damage caused by improper care, accident, unauthorised repair or modifications are not covered under this warranty.


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



ClicOn Standard Duty Pedestal Mount

SKU: 202010

Fits: With any ClicOn Holder

6,5inch / 165mm Standard Duty Pedestal Mount for a stable installation of your device into vehicles or any flat smooth surface. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$59.99

ClicOn Standard Duty Pedestal Mount

SKU: 202011

Fits: With any ClicOn Holder

7,5 inch / 165mm Standard Duty Pedestal Mount with Suction Cup for a stable installation of your device into vehicles or any flat surface. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$74.99

ClicOn Standard Duty Pedestal Mount

SKU: 202012

Fits: With any ClicOn Holder

11 inch / 180mm Standard Duty Pedestal Mount with Suction Cup for a stable installation of your device into vehicles or any flat surface. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$79.99

ClicOn Standard Duty Pedestal Mount

SKU: 202014

Fits: With any ClicOn Holder

10inch / 340mm Standard Duty Pedestal Mount with Clamp for a stable installation of your device to a flat or round bar. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$99.99

ClicOn Standard Duty Pedestal Mount

SKU: 202015

Fits: With any ClicOn Holder

10 inch / 345mm Standard Duty Pedestal Mount with small clamp for a stable installation of your device to a flat or round bar. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$94.99

ClicOn Standard Duty Pedestal Mount

SKU: 202016

Fits: With any ClicOn Holder

5inch / 132mm Standard Duty Pedestal Mount for a stable installation of your device into vehicles or any flat smooth surface. The AMPS mounting profile equips the mount to easily attach our range of holders or form part of your own solution.

$59.99

ClicOn Heavy Duty Mount with Standard Pedestal

SKU: 213540

Fits: Dodge Pick Up 1500 13-18

This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.

$69.90

ClicOn Handlebar Mount with tilt swivel plate

SKU: 215083

Fits: ClicOn

Motorcycle mount to suit handle bar size 26.0mm

$69.00

ClicOn Extension part 4"

SKU: 215514

Fits: ClicOn

This Extension Part is one part of the solution. Build your own solution by combining the Base/Top Part, other Extension Parts, Angled Top Part, MultiMoveClip and the Mounting Plate.

$35.00

ClicOn Extension part 2"

SKU: 215515

Fits: ClicOn

This Extension Part is one part of the solution. Build your own solution by combining the Base/Top Part, other Extension Parts, Angled Top Part, MultiMoveClip and the Mounting Plate.

$29.00

ClicOn Base/top

SKU: 215516

Fits: ClicOn

This Base/Top Part is one part of the solution. Build your own solution by combining the, Extension Parts, Angled Top Part, MultiMoveClip and the Mounting Plate.

$45.00

ClicOn Pedestal mount 4" with MultiMove Clip

SKU: 215518

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$139.00

ClicOn Mounting Plate - Round

SKU: 215522

Fits: ClicOn

This Mounting Plate is one part of the solution. Build your own solution by combining the, Base/Top Part, Extension Parts, MultiMoveClip and the Angled Top Part.

$19.00

ClicOn Angled top part

SKU: 215524

Fits: ClicOn

This Angled Top Part is one part of the solution. Build your own solution by combining the, Base/Top Part, Extension Parts, MultiMoveClip and the Mounting Plate.

$45.00

ClicOn Pedestal mount 4"

SKU: 215525

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$105.00

ClicOn Pedestal mount 6"

SKU: 215526

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$109.00

ClicOn Pedestal mount 2"

SKU: 215532

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$89.00

ClicOn Pedestal mount 8"

SKU: 215533

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$115.00

ClicOn Extension part 6"

SKU: 215534

Fits: ClicOn

This Extension Part is one part of the solution. Build your own solution by combining the Base/Top Part, other Extension Parts, Angled Top Part, MultiMoveClip and the Mounting Plate.

$39.00

ClicOn MultiMoveClip

SKU: 215538

Fits: ClicOn

This MultiMoveClip is one part of the solution. Build your own solution by combining the, Base/Top Part, Extension Parts, Angled Top Part and the Mounting Plate.

$15.00

ClicOn Extension part 8"

SKU: 215549

Fits: ClicOn

This Extension Part is one part of the solution. Build your own solution by combining the Base/Top Part, other Extension Parts, Angled Top Part, MultiMoveClip and the Mounting Plate. See Details For Related Products Below.

$45.00

ClicOn Pedestal mount 10"

SKU: 215550

Fits: ClicOn

This Pedestal Mount set can be used by itself to mount a device holder onto, or build your own solution by combining the extension parts.

$119.00

ClicOn Pedestal Mount for Cable Entry 4"

SKU: 215564

Fits: ClicOn

This Pedestal Mount is One Part of the solution. Use it by itself or build your own solution by combining an angled top part to mount a device holder onto. See Details For Related Products Below.

$83.22

ClicOn Pedestal Mount for Cable Entry 6"

SKU: 215565

Fits: ClicOn

This Pedestal Mount is One Part of the solution. Use it by itself or build your own solution by combining an angled top part to mount a device holder onto. See Details For Related Products Below.

$86.85