Hard Wired Charging Adjustable Holder
Top Support for an Extra Firm Hold
This hardwired charging car phone holder is made for the Apple iPhone 12 Mini. It is moulded to the shape of the device, so it docks and releases with one hand and stays firmly in place on rough roads.
It is hardwired into the vehicle's power, which keeps the 12V socket free and the cabling out of sight. A professional installer is recommended. A tilt swivel turns the screen from portrait to landscape and angles it away from glare. A top support adds an extra hold for rough roads.
It is the holder on its own. It screws onto a ClicOn dash mount with the screws provided, so pick the mount made for your vehicle to complete the set-up. When you change phones later, you only need a new holder; the mount stays in the car.
Firm and secure fit
- Customised design to firmly fit and hold your smartphone securely.
Designed to be used with standard cases
- Dimension: To fit Height: 137-144 mm, Width: 75 mm, Thickness 2-11mm.
- If you are using a skin or cover, ensure you measure the Height, Width and Thickness of the device with that skin or cover before ordering.
Hardwire install
- Dual USB Port Cig-Plug Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS pattern mount holes
- Mounting the Holder onto a Car Dashboard Mount is easy with the AMPS hole mounting plate.
Landscape to portrait
- All ClicOn holders come with a tilt swivel that can rotate 360 degrees and tilt the holder 17 degrees in any direction for optimal viewing and avoiding light reflection.
Fits
- IPhone SE 2nd Gen iPhone 12 Mini iPhone 13 Mini.
- The Holder without a Mount
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
| This Holder Fits | iPhone SE 2nd Gen iPhone 12 Mini iPhone 13 Mini |
| SKU | 527662 |
| Barcode # | 7320285276628 |
| Brand | ClicOn |
| Shipping Weight | 0.2600kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.260m |
| Shipping Length | 0.060m |
| Shipping Cubic | 0.001560000m3 |
Below you will find the installation instructions for the Hard Wired Charging Adjustable Holder (SKU:527662), you can click on the images to open a larger version in a new tab
Step 2
2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but it can still be adjusted.
Step 3
3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards, so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, and at the same time, pull the device out and down from the holder.
Hardwired charging car phone holder for the Apple iPhone 12 Mini. Hardwire install. 360-degree tilt swivel. Top Support for an Extra Firm Hold. AMPS pattern holes. Mount sold separately.
Our Price

One Year Warranty

Free Shipping Over $110.00

30 Days Return Policy

Australian Owned & Operated

