HMP 2-Part Solution Builder
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Please read all of the instructions and look at the pictures before attaching the ClicOn.
1. Clean the area where the ClicOn is to be installed with the enclsoed alcohol pad. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Peel off the adhesive tape covers on the ClicOn.
2. Press the angled edge on the upper part of the ClicOn into the gap between the frame surrounding the air vent and the panel surrounding the display, press it upward under the panel surrounding the display.
3. Squeeze the ClicOn together and press the lower edge into the gap between the gap openers. Press forward on the lower part of the ClicOn so the thin edge goes all the way into the gap. Pull out the gap openers.
4. The ClicOn is in place.
|This Mount Fits||
Audi A4/S4/RS4 Year(s):08-15