HMP 2-Part Solution Builder
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Please read all of the instructions and look at the pictures before attaching the ClicOn.
1. Open the compartment. Loosen the screw in the frame surrounding the compartment. Press the thin end of one of the enclosed gap openers into the gap between the compartment frame and the dashboard, by the side of the compartment, to widen the gap. Press the other gap opener into the gap between the compartment frame and the frame surrounding the air vent. Place the gap openers as shown in the picture. Peel off the cover of the adhesive tape on the ClicOn.
2. Press the angled edge on the ClicOn into the gap between the gap openers.
3. Place your fingers inside the ClicOn and pull the lower part of the ClicOn towards you/downwards. Hook the lower part of the ClicOn under the upper edge of the air vent. Pull out the gap openers. Retighten the screw.
4. The ClicOn is in place.
|This Mount Fits||Mercedes Benz Vito Year(s):04-14
Mercedes Benz Viano Year(s):04-14