HMP 2-Part Solution Builder
ClicOn Angled Mount
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Please read all of the instructions and look at the pictures before attaching the ClicOn.
- 1. Press the thin end of the enclosed gap opener into the gap between the two panel sections, to widen the gap. Peel off the cover of adhesive tape on the ClicOn.
- 2. Hold the ClicOn in an almost horizontal position and press the curved edge on the upper part of theClicOn into the gap next to the gap opener. Flip the ClicOn down, towards the floor. The curved edge will then hook behind the stereo panel frame. Pull out the gap opener.
- 3. Press the gap opener into the gap in the panel section underneath the dashboard. Hold it in that position, then press firmly forward on the lower part of the ClicOn so the angled edge goes into the gap next to the gap opener. Press until you see or hear/feel it snaps into place. Press upwards underneath the ClicOn to make sure the angled edge is all the way into the gap. Pull out the gap opener.
- 4. The ClicOn is in place.
Fits: Nissan Tiida Year(s):05-11
Be The First To Review This Product!
Help other Neovox Pty Ltd users shop smarter by writing reviews for products you have purchased.