HMP 2-Part Solution Builder
ClicOn Angled Mount for Ford F 250 99-04
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Attention! Read all instructions and look at the pictures before attaching the ClicOn.
|Attention! Read all instructions and look at the pictures before attaching the ClicOn. NOTE: To be able to install the ClicOn in some models you have to use the enclosed gap opener to widen the gap between the stereo and the surrounding panel frame. For other models where the gap is wide enough you don´t need to use the gap opener to widen the gap. Otherwise the same directions apply as shown below.
1. Adjust the air vent. Press the thin end of the enclosed gap opener into the gap between the stereo and the surrounding panel frame to widen the gap. Peel off the cover of the adhesive tape on the ClicOn. Place the ClicOn over the frame between the stereo and the air vent, below the gap opener, so the grooved edge on the right side goes slightly into the gap, and the left side of the ClicOn goes into the air vent.
2. Hook the grooved edge on the left side of the ClicOn over the air vent panel edge.
3. Press forward on the right side of the ClicOn so the grooved edge goes all the way into the gap. Press until you see or hear/feel it snaps into place. Pull out the gap opener and adjust the air vent.
4. The ClicOn is in place.
Fits: Ford F 250 Year(s):99-04
Be The First To Review This Product!
Help other Neovox Pty Ltd users shop smarter by writing reviews for products you have purchased.