Charging Adjustable Holder - Hard Wire Install
Top Support for an Extra Firm Hold
THE HOLDER
- Attach to the Mount to hold your device firmly & securely using the screws provided. The Holder can also form part of your solution.
FIRM & SECURE FIT
- Customised design to firmly fit and hold your smartphone securely.
DESIGNED TO BE USED WITH STANDARD CASES
- Dimension: To fit Height: 137-144 mm, Width: 75 mm, Thickness 2-11mm.
- If you are using a skin or cover make sure you measure the Height, Width and Thickness of the device with that skin or cover on, BEFORE ORDERING.
HARDWIRE INSTALL
- Dual USB Port Cig-Plug Charger that supports Qualcomm QC 3.0A quick charge.
- Quick charge only, works with compatible devices.
- Green USB Port: QC 3.0A for a quick charge.
- White USB Port: 2.4A for charging a second device.
AMPS PATTERN MOUNT HOLES
- Mounting the Holder onto a Car Dashboard Mount is made easy with the AMPS hole mounting plate.
LANDSCAPE TO PORTRAIT
- All ClicOn holders come with a tilt swivel that can rotate 360° and tilt the holder 17° in any direction for optimal viewing and avoiding light reflection.
- The Holder
- Firm & Secure Fit
- Hardwire Install
- AMPS Pattern Mount Holes
- Landscape to Portrait Viewing
This Holder Fits | iPhone 6/ 6s/ 7/ 8/ X/ Xs/ SE 2nd Gen/ 12 Mini iPhone 13 Mini |
SKU | 527662 |
Barcode # | 7320285276628 |
Brand | ClicOn |
Shipping Weight | 0.2600kg |
Shipping Width | 0.100m |
Shipping Height | 0.260m |
Shipping Length | 0.060m |
Shipping Cubic | 0.001560000m3 |
Below you will find the installation instructions for the Charging Adjustable Holder - Hard Wire Install (SKU:527662), you can click on the images to open a larger version in a new tab
Step 2
2. Place the attaching plate in the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate, so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but it can still be adjusted.
Step 3
3. To place the device in the holder: Place the upper part of the device in the holder, then press the device forwards and upwards, so it snaps into place in the holder. To remove the device from the holder: Press upwards on the lower part of the device, and at the same time, pull the device out and down from the holder.
Our Price
One Year Warranty
Free Shipping Over $110.00
30 Days Return Policy