Zebra


Please note: Industry does not have an official standard mounting hole profile. ClicOn uses the AMPS pattern throughout our range of mounts and holders. The AMPS pattern is a series of four holes aligned in a rectangular profile. Some manufacturers use two of the four holes while maintaining the AMPS pattern spacing dimensions. The four holes are spaced at 30.mm x 38mm (1.181” x 1.496”) and the diagonal measurement at 48.5mm (1.912 inches).



ClicOn Passive Holder with Tilt Swivel

SKU: 511707

Fits: Zebra TC70/75

The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$69.99

ClicOn Passive Holder with Tilt Swivel

SKU: 511857

Fits: Zebra TC70/75

Swiveling top support for an extra firm fit. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$179.99

ClicOn Passive Holder with Tilt Swivel

SKU: 511926

Fits: Zebra TC56Zebra TC51

Fits device with Zebra Original Rugged Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$69.90

ClicOn Passive Holder with Tilt Swivel

SKU: 511927

Fits: Zebra TC56Zebra TC51

Fits device without Original Rugged Boot.The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$69.90

ClicOn Passive Holder with Tilt Swivel

SKU: 511959

Fits: Zebra TC56Zebra TC51

3-point holder for a more secure hold. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$89.90

ClicOn Active Holders with Tilt Swivel

SKU: 512707

Fits: Zebra TC70/75

The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$159.90

ClicOn Active Holders with Tilt Swivel

SKU: 512862

Fits: Zebra TC70/75

Integrated USB Host Cable. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts,forklift mounts or form part of your own solution.

$239.90

ClicOn Active Holders with Tilt Swivel

SKU: 512926

Fits: Zebra TC56Zebra TC51

Fits device with Zebra Original Rugged Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$159.90

ClicOn Active Holders with Tilt Swivel

SKU: 512927

Fits: Zebra TC56Zebra TC51

Fits device without Zebra Original Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$159.90

ClicOn Active Holders with Tilt Swivel

SKU: 512959

Fits: Zebra TC56Zebra TC51

Fits device without Zebra Original Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$179.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513707

Fits: Zebra TC70/75

The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$179.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513857

Fits: Zebra TC70/75

Swiveling top support for an extra firm fit. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$239.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513862

Fits: Zebra TC70/75

Swiveling top support for an extra firm fit. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$259.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513926

Fits: Zebra TC56Zebra TC51

Fits device with Zebra Original Rugged Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$169.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513927

Fits: Zebra TC56Zebra TC51

Fits device without Original Rugged Boot. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$169.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 513959

Fits: Zebra TC56Zebra TC51

3-point holder for a more secure hold. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$189.90

ClicOn Passive Holder with Tilt Swivel

SKU: 522707

Fits: Zebra TC70/75

3-point holder for a more secure hold. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$89.90

ClicOn Active Holders with Tilt Swivel

SKU: 526707

Fits: Zebra TC70/75

3-point holder for a more secure hold. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$169.90

ClicOn Fixed Install Holder - Hard Wired

SKU: 531707

Fits: Zebra TC70/75

3-point holder for a more secure hold. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts,forklift mounts or form part of your own solution.

$189.90

ClicOn Active Holders with Tilt Swivel

SKU: 560707

Fits: Zebra TC70/75

With 150 cm straight cable. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$169.90

ClicOn Active Holders with Tilt Swivel

SKU: 560753

Fits: Zebra TC70/75

3-point holder and a straight charge cable. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$179.90

ClicOn Active Holders with Tilt Swivel

SKU: 560857

Fits: Zebra TC70/75

Swiveling top support for an extra firm fit. The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts,forklift mounts or form part of your own solution.

$229.90

ClicOn Passive Holder with Tilt Swivel

SKU: 711019

Fits: Zebra TC56Zebra TC51

The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$69.99

ClicOn Passive Holder with Tilt Swivel

SKU: 711029

Fits: Zebra TC56Zebra TC51

For device with Powerbank BTRY-TC2X-PRPK1-01.The AMPS mounting profile equips the holders to easily attach to a variety of our mounting solutions that include pedestal mounts, suction mounts, bar mounts, forklift mounts or form part of your own solution.

$69.99