HMP 2-Part Solution Builder
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Please read all of the instructions and look at the pictures before attaching the ClicOn.
1. Use the enclosed alcohol pad to clean the area where the ClicOn is to be installed. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the console edge, to widen the gap. Peel off the cover of adhesive tape on the ClicOn. Press the angled edge on the right side of the ClicOn into the gap next to the gap opener. Pull out the gap opener.
2. Push firmly on the left side of the ClicOn so it flexes downward and hooks around the console sidewall edge. Press forward on the lower side of the ClicOn to make sure the angled edge is hooked all way around the console edge.
3. This ClicOn fits on the left and right side of the center floor console. You can also use one on each side.
4. The ClicOn is in place.
|This Mount Fits||Land Rover Range Rover Evoque Year(s):12-19|