HMP 2-Part Solution Builder
With Pre-Drilled AMPS Pattern Holes
This Dashmount has been custom designed to fit your vehicle's dashboard without damaging your interior. Designed for mounting ClicOn holders. ONE Part of a TWO Part Solution. Installation instructions provided.
Attention! Read all instructions and look at the pictures before attaching the ClicOn.
This ClicOn consists of two parts.
Part 1: Attaching part (the smallest part)
Part 2. ClicOn face plate
- 1. Peel off the cover of the adhesive tape on Part 1. Place Part 1 in the same position as in the picture, in the same hight. Press the angled edge of Part 1 into the gap between the dashboard and the dashboard.
- 2. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks behind the control panel and the adhesive attaches to the dashboard.
- 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive is to the right. Screw Part 2 onto Part 1 with the enclosed screws. NOTE: Screw straight into Part 1, in the same angle as Part 1.
- 4. The ClicOn is in place.
|This Mount Fits||Volvo XC90 Year(s):02-14|