A Holder designed to hold the device firmly and securely in position.
- Designed to be use without Skins or Covers
- The holder has a flock finish to help protect your device against scratching.
- Apple approved charging cable.
- Built with an Apple approved 12 volt plug-in charger the holder connects power to your device using the car cigarette lighter socket.
- The device can be easily removed and stored away or taken with you.
- The holder is equipped with a tilt swivel. The holder can be easily moved from a horizontal to landscape position. Once in position the holder can be adjusted to avoid light reflection.
- Made of ABS Plastic.
- 12 Months Warranty.
NO HOLES INSTALLATION
How to attach a holder to a dashmount - Note: actual dashmount & holder designs do vary
1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder
2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws
3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate
4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw