Price: AUD 48.99 (including 10 % tax)

Attention! Please read all of the instructions and look at the pictures before attaching the ClicOn. Note: This ClicOn can be attached within the width of the air vent.

• 1. Peel off both adhesive tape covers on the ProClip. Choose location for the ClicOn within the range of the width of the air vent. Place the ClicOn over the air vent at the selected position. Press the thin end of the two enclosed gap openers into the gap, one on each side of the ClicOn, between the padded part of the dashboard and the center console panel to widen the gap.

• 2. Press the thin end of the lower part of the ClicOn all the way into the gap between the gap openers. Pull out the gap openers.

• 3. Press the grooved edge on the upper part of the ClicOn into the gap between the air vent frame and the padded dashboard. Press until you see or hear/feel it snaps into place. (Note: if the gap is very tight, press the thin end of the two enclosed gap openers into the gap, one on each side of the ClicOn, to widen the gap. Then press the ClicOn into the gap)

• 4. The CilcOn is in place

Customer Reviews: