Price: AUD 48.99 (including 10 % tax)

Please read all of the instructions and look at the pictures before attaching the ClicOn mount. This ClicOn consists of two parts.

Part 1. Attaching part (the smallest part)

Part 2. ClicOn face plate.  

• 1. Peel off the adhesive tape cover on Part 1. Place Part 1 as shown in the picture, so the right side of the angled edge is aligned with the gap in the control panel.  

• 2. Press the angled edge on Part 1 into the gap between the frame surrounding the control panel and the dashboard. Press Part 1 forward/upward so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches to the dashboard.  

• 3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the adhesive tape cover on Part 2. Place Part 2 onto Part 1 so the holes match and the adhesive tape is downward. Screw Part 2 onto Part 1 with the enclosed screws. Screw straight into Part 1, in the same angle as Part 1.  

• 4. The ClicOn is in place.

Customer Reviews: