Fixed Install Holder - Direct Connection, Molex System - Bold 9000 - Blackberry - Holders - Phone

Close Window  Print this Page
Holders - Phone arrow Blackberry arrow Bold 9000 arrow Fixed Install Holder - Direct Connection, Molex System

Fixed Install Holder - Direct Connection, Molex System


Price: AUD 137.50 (including 10 % tax)

NO HOLES INSTALLATION:
How to attach a holder to a dashmount
1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder

2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws

3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate

4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw

A PDA/Mobile Holder designed to hold the device firmly in an up-right position.

 

  • With the built-in Tilt Swivel the holder can be adjusted to avoid light reflection on the screen.
  • The device can be easily removed and stored away or taken with you.
  • The power cable has an in-line 12/24 volts power regulator that allows connection directly to the vehicle’s power system.  Output 5 Volts 2 amps.
  • The assembly can also provide power & charge to a range of Blue Tooth GPS receivers or a second device.
  • Manufactured in ABS Plastic.
  • One Year Warranty

Molex adapter cables

  • 945070 Adaptor Cable, Molex 4 Pin to DC,4mm 
  • 945071 Adaptor Cable, Molex 4 Pin to RJ11
  • 945072 Adaptor Cable, Molex 4 Pin to Mini DIN 6 Pin Male
  • 945073 Adaptor Cable, Molex 4 Pin to DC, 3.5 mm
  • 945074 Adaptor Cable, Molex 4 Pin to Mini USB
  • 945075 Adaptor Cable, Molex 4 Pin to PS2
  • 945076 Adaptor Cable, Molex 4 Pin to Mini DIN 6 Pin Female
  • 945077 Adaptor Cable, Molex 4 Pin to RJ45
  • 945078 Adaptor Cable, Molex 4 Pin to RX/TX/Ground with open end wires

Select Molex cable here

 




Product Number: 513083



Customer Reviews:

Jim Dannock  (Sunday, 21 February 2010)
Rating: 5
This is an excellent product that allows connection to power whilst freeing up the power adpator. There is also an additional 5V outlet which I can connect my SatNav. Matched to a centre ClicOn bracket for a Falcon FG. it is easy to connect directly to the leads for the power adaptor.



Close Window  Print this Page