Price per Unit (piece): AUD 125.00 (including 10 % tax)

An iPad Holder designed to hold the device firmly in all positions.

• With the built-in Tilt Swivel the holder can be adjusted to avoid light reflection on the screen.
• Built with 12 volt plug-in charger the holder connects power to your device using the car cigarette lighter socket. 
• The device can be easily removed and stored away or taken with you.
• Manufactured in ABS Plastic.
• One Year Warranty

Please read all of the instructions and look at the pictures before attaching the holder. 
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 
 
2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. 
 
3. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forwards so it snaps into place in the holder. To remove the device from the holder: Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder. 
 
4. The holder is in place.

Customer Reviews: